seigla.is

Picture Þorgeir Baldursson

S-66 Heidi

A new boat is delivered by Seigla Ehf. The boat has been delivered to Ditlefsen Fiskeriselskap AS from Brønnøysund in Norway. It is the third 13 meter boat from Seigla delivered to Norway this year. One more will follow within a few weeks.

The specifications of the boat are:

Length: 12,97 meter
Width: 4,60 meter
Depth: 1,27 meter
Engine: Yanmar 6AYM-GTE 829 Hp at 1900 rpm
Gear: ZF-500IV with ratio 1,97:1
Shaft & propell: West-Mekan controllable pitch
Fish hold: 17x 660 ltr containers from Sælplast
Fuel tank: ca 4200 ltr
Water tank: 500 ltr

Standard
Standard with all larger Seigur boats:
- HMI (Human machine interface)
- GRP sandwich PVC construction. Made by VARTM (Vacuum Assisted Resin Transfer Molding)
- Drop keel  (Nor-Fishing innovation prize winner of 2008)
- Integrated windows in the construction

VARTM
The GRP sandwich PVC construction have proved to be important on fast fishing boats, as the late accident in Norway showed, where almost three people killed when two of the front windows were blown in by a rough sea. They were in a hand-laid single skin fiberglass boat what has it’s limits. These limits you do not have with the GRP sandwich PVC construction, the limit is here when the glass will break, not when the fiberglass will give in as with hand-laid single skin fiberglass. Some other advantages of VARTM are: It isolated, noise reducing, strong as steel, 3x lighter as steel.  More details about GRP sandwich PVC construction can be found on our website http://www.seigla.is/en/page/vartm_1

Engine
The engine will have an Europafilter installed for oil cleaning, this reduces the number of times to change the oil significant.

Electronic system
A Cummins Onan 13,5 Kw generator is installed for extra power supply together with the ASC system (Automatic start control)  and the Studer HP-Compact 4400-24 4 Kw inverter/charger the power supply is guaranteed. 
About the ASC system:
It has four modes:

1                    Auto select
2                    Manually select 230V from the inverter
3                    Manually select 230V from Generator set
4                    Manually select 230V from Shore connection

With the selector on auto, the system will monitor the consumer batteries and automatically start the 230 V Generator set when needed, then after a few sec. it will connect the Gen-set to the power distribution and the Inverter/charger will charge the batteries. 

Hydraulics
On the engine there are 2 hydraulic pumps installed, 1x 147 ltr and 1x 75 ltr, both from Danfoss Sauer, the control block is for 6 users, with a 300 ltr tank with cooling. Everything connected with pipes (not hoses!)

HMI
Shortly the HMI is offering features like:
Quick-menu in the touch screen, programmable according to customers needs.
Control over the complete alarm system
Control over the heating and Wipers with up to 60 sec time delay.
Control of the drop keel
Control of the lights
Control of the navigation lights
Control of the Hydraulics
Control of the pumps

Heating
The heating is provided through floor heating in the cabin and wheelhouse. When the main engine is not running, the Eberspächer 10 Kw takes over this job. In addition to this there are 4 airblowers outlets 1 in the wheel house, 1 in the toilett room and 2 in the cabin. When the boat is connected to a land connection, the two 2 Kw heaters are providing the heat in the cabin and in the engine room.

Various equipment
Sleipner SH300 bowthruster
Trimflaps
Metal Halid search light from DHR
Chair with suspension unit from Cleeman Chair systems
Libra weathertight doors
6 persons Viking life raft 
5x Rule 3000 pump
Fire extinghuisher system from Securitas

Navigation equipment
Delivered by Elektro Bodø AS in Norway and installed by Rafröst in Iceland.  The boats shows here how spacious it is, all equipment is installed neatly in the dashboard and beside the captain.

4 screens in the dashboard, 2x 17” and 2x 19”
                - 19” for Furuno M-1834CBB Radar
                - 17” for Roxann
                - 19” for Olex plotter
                - 17” for Skipper ETF38E fishfinder
Furuno SC-30 GPS/Compass in the dashboard

Furuno FCV-1150 Ekkolodd with own screen on the side
2x Navman NS explorer 710 VHF
Furuno FA-150 AIS-A system
Furuno GPS GP-320
Simrad AP50 autopilot
Simrad RF300 and RI35 rudder indicator
Simrad FU50 Follow-up steering
Matre pilot guard PG-1

On the deck there is a complete steering control console.

Cabin
There is accommodation for 4 people, 3 benches and a table.
The spacious galley has four electrical cooking plates, so no open fire. A microwave/stove combination and a ventilator above this. A sink with warm and cold water. Further a refridgerator and a seperate freezer.

Wheelhouse
There are two benches and a table, door to the toilet where there is a shower and a door to the deck.

Fishing equipment
Two cranes from Amco Veba are installed, one on the roof of the wheelhouse, the smaler crane on the roof of the enginehouse.
Smådal-Mekaniske will take care of the delivery and installation of the fishing equipment.

Approval
The stability of the boat is approved for bankfiske 1 and 2.

For more pictures click here

For more information, please contact us.

Seigla Ehf
Goðanes 12
603 Akureyri, Iceland
www.seigla.is
Tlf: +354 551 2809
Fax: +354 551 2810